Remove the two bolts and nuts from the black metal U-brackets.
Fit the Soft Top around the lip of bucket without any bolts. line up the U-bracket right on top of the middle BUMP (see photo).
Mark the hole of U-bracket on your bucket, check it twice and check it again! **If you do make the hole in the wrong spot, just drill a new one. A few extra ventilation holes won't make any difference.
Remove soft top and make a 5mm hole on your mark.
Loop the black straps around the U-Brackets.
Insert the U-brackets into the Gray Soft Top Pockets .
Install Soft Top and bolt it on with the nut on the outside of the bucket.